Hackberry portal › Forum › HACKberry › Report › Color separated HACKberry without painting This topic contains 2 replies, has 2 voices, and was last updated by Yuki Ogasawara 9 months ago. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts 2016年4月22日 at 6:02 PM #907 Yuki OgasawaraKeymaster I do think HACKberry is so cool designed prothetic hand. The HACKberry on exiii’s website is separated by color. And i wanted to build like that. However, the STL datas of “PalmBase” and “BackCover” are includes both color. So we need to paint or something after 3D print. Then we separated these 3D model by color. The Step datas and STL datas here. After 3D printing, adhered them and built the rest normally. Now you can see difference between them. This topic was modified 2 years, 3 months ago by Yuki Ogasawara. This topic was modified 2 years, 3 months ago by Yuki Ogasawara. This topic was modified 2 years, 3 months ago by Yuki Ogasawara. This topic was modified 2 years, 3 months ago by Yuki Ogasawara. This topic was modified 1 year, 5 months ago by Yuki Ogasawara. 2017年11月10日 at 9:45 AM #1430 Chris DawsonParticipant Hi Yuki, How did you perform the cut to separate the parts? I’d like to be able to perform this cut on the new versions. Thanks Chris. 2017年11月14日 at 9:35 PM #1431 Yuki OgasawaraKeymaster Hi Chris. Actually i didn’t cut this model myself. So i can’t original way to separate these palm and back model. But, i think you can cut newest model with using my separated data above. what you have to do is 1.Download newest palm and back model from github. we call it A. 2.Download my surface model. not mechanical one. we call it B. 3.Using any kind of CAD, cut A with using B. if you have any question, tell me again. regards. Yuki. Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic.