Hackberry portal Forum HACKberry Q&A Starting printing

This topic contains 2 replies, has 2 voices, and was last updated by  Luigi Ermini 4 years, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #496

    Luigi Ermini
    Participant

    Hi Hiroshi,
    first of all I would like to congratulate for the terrific project and the amazing solutions you adopted for mechanical and actuators.
    I’m starting printing the files and I’m setting up the whole thing; basically I want to start with the HbPalmBase03.stl which seems to be the hardest and longest print (compared to fingers).
    I assume that you don’t have a version with splitted parts, since you posted the palm in one file (it’s going to use a lot of support) do you have a photo (or better a video) of the HbPalmBase03.stl right after the printing so I can compare the results?

    Thank you very much,

    Luigi.

    #498

    Hiroshi Yamaura
    Keymaster

    Hi Luigi,
    As for HbPalmBase03, please check this post.
    http://exiii-hackberry.com/forums/topic/ive-been-printing-the-exiii-hackberry/
    Thanks!

    #501

    Luigi Ermini
    Participant

    Perfect answer, thank you. I don’t know how I missed that post.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.