Hackberry portal › Forum › HACKberry › Q&A › Textures & Aesthetics This topic contains 1 reply, has 2 voices, and was last updated by Hiroshi Yamaura 3 years, 3 months ago. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 2017-02-22 at 9:46 am #1255 Edgar VillarrealParticipant Which materials do you recommend to give the same finish and textures to the 3D printed parts? Above, it looks like vinyl, but the underside is matte. How can you achieve the same finish like the image on the attachments? Thank you very much Attachments:exiiii.png 2017-02-22 at 9:52 am #1257 Hiroshi YamauraKeymaster Hi Edgar, thank you for posting. As for the surface, we use wrap film. You can find it from the website of 3M. http://www.3m.com/3M/en_US/company-us/all-3m-products/~/All-3M-Products/Commercial-Solutions/Graphics-Signage/Signs-Displays/Films-and-Substrates/Colored-Films/Colored-Wrap-Films/?N=5002385+8709314+8709363+8710674+8711017+8718947+8719039+8729400+3294857497&rt=r3 Author Posts Viewing 2 posts - 1 through 2 (of 2 total) You must be logged in to reply to this topic.